mirror of
git://git.yoctoproject.org/meta-intel
synced 2026-01-01 13:58:05 +00:00
quark: use UUID for rootfs
Port the change http://lists.openembedded.org/pipermail/ openembedded-core/2016-October/127948.html into wks files in meta-intel. Note: This patch has not been on OE master branch at this point. Original commit message: ---------------------------------- systemd-bootdisk.wks: use PARTUUID Root device name in systemd-bootdisk.wks is 'sda'. This can cause images, produced using this wks to refuse booting if real device name is not 'sda'. For example, when booting MinnowBoard MAX from MicroSD card the boot process stucks with this message on the boot console output: Waiting for root device /dev/sda2... This happens because real device name of MicroSD card on this device is mmcblk1. Used --use-uuid option for root partition. This should make wic to put partition UUID instead of device name into kernel command line. [YOCTO #10485] Signed-off-by: Ed Bartosh <ed.bartosh at linux.intel.com> ---------------------------------- Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
This commit is contained in:
parent
8bad3a5c04
commit
9373044911
|
|
@ -4,6 +4,6 @@
|
|||
|
||||
part /boot --source bootimg-efi --sourceparams="loader=systemd-boot" --ondisk mmcblk0 --label msdos --active --align 1024
|
||||
|
||||
part / --source rootfs --ondisk mmcblk0 --fstype=ext3 --label platform --align 1024
|
||||
part / --source rootfs --ondisk mmcblk0 --fstype=ext3 --label platform --align 1024 --use-uuid
|
||||
|
||||
bootloader --timeout=0 --append="console=ttyS1,115200n8 earlycon=uart8250,mmio32,0x9000b000,115200n8 reboot=efi,warm apic=debug rw LABEL=boot debugshell=5"
|
||||
|
|
|
|||
|
|
@ -4,6 +4,6 @@
|
|||
|
||||
part /boot --source bootimg-efi --sourceparams="loader=systemd-boot" --ondisk sda --label msdos --active --align 1024
|
||||
|
||||
part / --source rootfs --ondisk sda --fstype=ext3 --label platform --align 1024
|
||||
part / --source rootfs --ondisk sda --fstype=ext3 --label platform --align 1024 --use-uuid
|
||||
|
||||
bootloader --timeout=0 --append="rootwait console=ttyS1,115200n8 earlycon=uart8250,mmio32,0x9000b000,115200n8 reboot=efi,warm apic=debug rw LABEL=boot debugshell=5"
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user