According to the Intel graphics guys and Ubuntu, it's ok to now have
rc6 enabled by default (as long as rc6p is not also enabled).
Accordingly, we'll use the rc6 feature that enables it. If there are
problems, it can be easily disabled at build-time by removing tmp/rc6
from KERNEL_FEATURES, or can be disbled at run-time using the kernel
parameter i915_enable_rc6 = 0.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Have sugarbay use gst-va-intel and va-intel so we can easily test and
make use of the video acceleration capabilities of this machine.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Update the README.sources for all the meta-intel BSPs to reflect final
Yocto tarball location for denzil.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
The 3.0 based boards are lazy compared to our new modern ones.
Without this patch, the linux-yocto-3.0 kernel do_patch() task would
fail with:
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/cedartrail/build/build/tmp/sysroots/x86_64-linux/usr/bin/updateme:
line 434: yocto/standard/cedartrail-standard.scc: No such file or
directory
Setting the KBRANCH explicitly avoids this issue. This brings the
following recipes inline with the fri2 and sys940x BSPs.
Fix proposed by Bruce Ashfield.
Testing: Built linux-yocto_3.0 for all machines involved, including the
nopvr, noemgd variants. All built linux-yocto_3.0 successfully.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Kishore Bodke <kishore.k.bodke@intel.com>
n450 should use i915 rather than i965.
[YOCTO #1840] fixed
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
These layers all contain machine configuration that depends on having
the meta-intel common layer enabled as well, so use LAYERDEPENDS in the
layer configuration for each one to make this explicit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Based on community input, it might be more user-friendly to have some
basic information about submitting patches in the BSP README itself.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
The affected BSPs now need to access common metadata in locations off
of the top level of meta-intel, so need to add meta-intel itself to
their layer configuration. This updates the READMEs for those BSPs to
mention that.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
There's nothing in meta-intel/common used by sugarbay any longer, and
is too broad anyway, so remove it from BBFILES.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
grub2 is now the default, so explicit preferred entries are
unnecessary. It also needs to be installed in the rootfs, so we need
to add it as a dependency.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
As the all the BSPs use the same BSP branch and meta commit ID as the base
recipe, there is no need specify the KBRANCH and SRCREVs. Not doing so
greatly simplifies maintenance. Leaving the syntax in place, but commented
out, serves as documentation should the need arise to use a different BSP
branch or meta commit ID.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Allow users or layers to override PREFERRED_PROVIDER_virtual/kernel.
This is required to use the linux-yocto-rt kernel, for example.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
All the BSPs build out of the preempt-rt/base branch (rather than a
preempt-rt/$MACHINE branch), so separate KMACHINE and KBRANCH assignments are
required for each BSP.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Require the tune file for x86_64, then TARGET_ARCH and TARGET_CC_ARCH
are set already. Also remove superfluous "snb" package architecture that
doesn't do anything.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
This allows meta-intel sub-layers to coexist with meta-yocto when building
formfactor for different machines with the same layer setup.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
The linux-yocto recipes have been renamed to include explicit
version numbers. The meta-intel bbappends must be updated to
follow the new naming convention.
As a consequence of the recipe renames any SRCREV specificiations
that were part of a machine.conf have been moved to the corresponding
bbappend file. This allows the 2.6.34 and 2.6.37 SRCREVs to co-exist.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Minor whitespace cleanup.
Remove inadvertant? linux-libc-headers provider change.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Add systemtap to task-core-tools-profile for crownbay,
crownbay-noemgd, fishriver, jasperforest, n450, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
My previous commit used a self referencing immediate expansion assignment using.
This causes a circular reference and build failure, particularly when more than
one layer is configured in.
Use the _prepend mechanism in conjunction with the immediate expansion
assignment operator to accomplish a similar thing without the self referencing.
Note: This patch is dependent on changes to oe-core, specifically:
http://lists.linuxtogo.org/pipermail/openembedded-core/2011-May/003145.html
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Phill Blundell <pb@pbcl.net>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Change the build instructions to use BSP tarballs instead of git
clones. The git clone info remains as a mentioned alternative.
Fixes [YOCTO #1103].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Several BBFILE_COLLECTIONS assignments in the layer.confs for these
meta-intel layers added unwanted machine overrides, resulting in
truncated values for this variable - remove them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
