0001-support-authentication-for-kickstart.patch
0002-pykickstart-parser.py-add-lock-for-readKickstart-and.patch
0004-load.py-retry-to-invoke-request-with-timeout.patch
refreshed for new version.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
0001-setup.py-switch-from-distutils-to-setuptools.patch
removed since it's included in 0.51.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
0001-Don-t-set-tp_print-on-Python-3.patch
removed since it's included in 4.1.4
Changelog:
==========
In previous versions, if you asked for the position of a body (a) whose
elliptical or hyperbolic orbit has an eccentricity very close to 1.0 and (b)
which is very far from perihelion, then the underlying C library would print
a warning Near-parabolic orbit: inaccurate result but let your Python script
continue on unawares. Now, no message is printed directly to the screen, and
instead a RuntimeError will tell you why PyEphem can't compute the body's
position.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Tuna is a cui/gui tool for tuning of running processes.
It is useful to see and changed irq affinity on an embedded board.
The chosen revision of tuna is the last commit to this day and not the
last release. This is due to the python3-ethtool module which was
required in the last release but isn't anymore. Tuna now has a built-in
module instead.
Despite tuna's homepage's dependencies section, python3-inet_diag isn't
required anymore.
Signed-off-by: Erwann Roussy <erwann.roussy@savoirfairelinux.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Backport patch from upstream for python3-blivetgui to use symbolic
list-add and edit- icons that Adwaita dropped old ones.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <tvgamblin@gmail.com>
setuptools.patch removed since it's included in 3.12.0
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
This setup.py installs data_files with absolute paths, which isn't
supported by bdist_wheel. Use setuptools_legacy as the legacy install
task needs to be used.
Also update patch status on the setuptools port.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
fedorahosted.org is retired, so set the GitHub page as the homepage.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
The setup.py installs to arbitrary target paths, so can't use the new
bdist_wheel installation method.
Reverts daba6521f which was a sympton of the bad usage.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
The setup.py installs to arbitrary target paths, so can't use the new
bdist_wheel installation method.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Add recipe for python3-pydot which is an interface to Graphviz.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
With wheels changes it is also getting installed under PYTHON_SITEPACKAGES_DIR
perhaps something to fix in setup.py but this fix works better from a
packager point of view.
Moves the systemd unit files and daemon into /usr/lib and /usr/libexec
dirs
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Backport a fix to migrate to use setuptools instead of distutils
Changes in this release are [1]
[1] https://github.com/storaged-project/blivet-gui/releases/tag/2.3.0-1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
* Add patch to switch from 'distutils' to 'setuptools'
* Set PIP_INSTALL_PACKAGE = "python_meh"
* Install files to ${datadir} as intended
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Recipe does not inherit pypi, nor is PN a reasonable guess for the wheel
name so set PIP_INSTALL_PACKAGE appropriately.
The wheel is built in ${S}/dist rather than ${B}/dist so set
PIP_INSTALL_DIST_PATH appropriately.
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
changelog:
===============================================================================
-Fixed an inadvertent loss of precision in the routine that computes a date’s
hours, minutes, and seconds. It was sometimes returning a small negative number
of seconds, which caused Python’s datetime type to complain
ValueError: second must be in 0..59.
-Users installing from source on Windows are now protected against a possible
encoding error as setup.py reads in two text files.
Signed-off-by: Xu Huan <xuhuan.fnst@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
changelog:
===============================================================
When you provide PyEphem with a Python datetime that has a time
zone attached, PyEphem now detects the time zone and converts
the date and time to UTC automatically.
A new search routine had been written and tested to power the
:ref:`transit-rising-setting` methods previous_rising(),
previous_setting(), next_rising(), and next_setting(). They
should no longer be susceptible to getting hung up in a loop.
You should also find them substantially faster.
Fixed the constellation() routine so that it uses astrometric,
rather than apparent, right ascension and declination. This
should make it more accurate along the borders of each
constellation.
Fixed how the underlying “libastro” library computes whether a
body’s image is deflected by gravity when its light passes close
to the Sun. Previously, users would see coordinates jump
unexpectedly as the deflection formula turned on and off haphazardly.
Fixed the star positions in the ephem.stars star catalog by adding
8.75 years of proper motion to each star. Previously, each
1991.25 position from the Hipparcos catalog was being incorrectly
treated as a 2000.0 position.
A new routine unrefract() lets you compute the real altitude of
a body that you observe in the sky at a given apparent altitude.
The old cities.lookup() function is now officially deprecated.
Because of a Google API restriction, it stopped working in 2018.
Signed-off-by: Xu Huan <xuhuan.fnst@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
This patch updates SRC_URIs using git to include branch=master if no branch is set
and also to use protocol=https for github urls as generated by the conversion script
in OE-Core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Upgrade to release 1.8.0:
- Add compatibility with pathlib paths
- Fix thread compatibility of modern windows implementation
- Fix handling of UNC names in legacy windows implementation
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Upgrade python3-blivetgui from 2.1.10 to 2.2.1.
* drop backported patch
0001-Fix-return-type-of-BlivetUtils.get_disks-1658893.patch
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Upgrade python3-blivet from 3.1.4 to 3.4.0.
* it imports selinux conditionally, so remove
0001-comment-out-selinux.patch
* rebase 0008-use-oe-variable-to-replace-hardcoded-dir.patch and
0010-invoking-mkfs-with-infinite-timeout.patch
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
This is the result of automated script (0.9.1) conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Upgrade to release 1.7.1:
- Changed conditional for when to try to use pyobjc version
- Add console_script entry point
- Increased python CI versions
- Fix minor issue in setup.py
- Fix issue with windows tests importing modules on non-windows
- Unit test cleanups, rewrites, and flake8 cleanups
- Windows: Fix legacy windows platform for multi-byte unicode and
add tests
- macOS: Add alternative pyobjc version to potentially improve
compatibility
- Add main method which allows calling via python -m send2trash
somefile
- Windows: Add support for using IFileOperation when pywin32 is
present on Vista and newer
- Add support for passing multiple files at once in a list
- Windows: Batch multi-file calls to improve performance
- Windows: Fix issue with SHFileOperation failing silently when
path is not found
License-Update: License remains BSD-3-Clause License
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
