This adds the -nonet option to xsltproc invocations, which fixes
compile errors when building gnome-doc-xslt-de.omf.
Also add intltool-native to DEPENDS, which was discovered to be
needed when building this recipe.
(From OE-Core rev: c6f791853acf8fec922c1ebcf62195be2615870d)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoids manual configuration of the BeagleBoard xM's ethernet port
(which shows up as usb0).
Fixes [YOCTO #930]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Fixes yocto [BUGID #876]
boot-directdisk.class looks in the wrong location for the bzImage to
install. Make it look in the right place.
(From OE-Core rev: 173d04ea828e7f790ede40929c8ffd7340b4c077)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduces a variable HALTARGS which specifies the arguments sent to
halt and reboot, and sets the default value to "-d -f", dropping the
previous -i (shut down all network interfaces before halt/reboot, which
causes a freeze with NFS root.)
Fixes [YOCTO #997].
(From OE-Core rev: ace183894a5319cd73c94fd2653bbe52f29dca0b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with git-native and rm_work enabled I've noticed git fetcher errors like:
warning: templates not found /OE/shr-core/tmp/work/x86_64-linux/git-native-1.7.3.4-r0/image/OE/shr-core/tmp/sysroots/x86_64-linux/usr/share/git-core/templates
fatal: Unable to find remote helper for 'http'
for every recipe using http:// for git repo
* after this change template_dir points to
/OE/shr-core/tmp/sysroots/x86_64-linux/usr/share/git-core/templates
without that workdir prefix
* haven't tested target recipe, but I guess it needs different fix or
maybe it worked before and gets broken by this change
[sgw: removed RFC comment, target patch to follow]
(From OE-Core rev: 4b2a6fa780567c0876540bb89af78d5c778985cb)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
groff-native is needed to ensure that configure finds
the groff-native binary instead of the host's groff,
this is to ensure the correct macros are used (-ms vs -mgs)
(From OE-Core rev: 1126e4daa69e3f365b060ef235b40e0f97a61705)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In current git fetcher, tag does not work due to commit http://git.pokylinux.org/cgit/cgit.cgi/poky/commit/?id=5920e85c561624e657c126df58f5c378a8950bbc. Tag is not in sha256 form, so it will be treated invalid, and silently replaced by latest revision.
To fix it, this patch treat tag name as branches name, thus it will be handled correctly later. Thanks Richard for reviewing and proposing the better approach.
Fix [YOCTO #972]
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Yu Ke <ke.yu@intel.com>
* Recipe cleanup, added missing metadata fields and fixed
whitespace issues
* Added Upstream-Status to patches
* Confirmed that CVE-2003-0655 does not apply to this recipe
as rscsi is not packaged
(From OE-Core rev: f7c35ad6267c7dfd37bad9c7521488c329f879b5)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Contributed by Martin Jansa via OE
Fixes [YOCTO #1003]
(From OE-Core rev: 2870697f08c171f455dbba03dd529b8c4cf11937)
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ubuntu has moved eglibc to /usr/lib/${arch}-linux-gnu and
/lib/${arch}-linux-gnu so we need that to be added to glibpth in
Configure.
Currently we set LD=ld in environment for recipes inheriting native
class. This overrides the LD settings in the Makefiles of perl and
it tries to link by calling ld which does not work since its using
-l<x> on commandline and ubuntu linker seems not to look into
the new location for these libraries. Its better to use gcc for linking
here anyway
[With tweak from Tom Rini to use CCLD, not LD]
(From OE-Core rev: 8ba700a4c593fd52bd01b6272b4c8285a71964f7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The RT kernel recipe was not updated to reflect the new git SRC_REV format nor
to take advantage of the recent updates made to the underlying infrastructure.
These fixes bring it up to date with the other linux-yocto* recipes and fix
various build issues people were seeing.
(From OE-Core rev: 690e87a2ffe8caa16379be26eb356c5bded17c1f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create the lockfile directory if it doesn't exist, rather than erroring out if
it doesn't exist (was also racy).
Also improve the wording of the error message shown when the lockfile's
directory is not writable.
Note for the future, this function should be improved, particularly with
regard to its exception handling. It should be catching the *exact*
exception(s) it will encounter when the file is locked, and continuing in that
case only. If it did that, there'd be no need for the proactive directory
writability check, as bb.utils.lockfile() would raise an appropriate IOError
for that case.
(Bitbake rev: 238151441c74db53d6e4d4753f4f96c32f6f13b6)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The point we need to take the lock is when the rpm files are written into the
deploy rpm directory. Since sstate makes the actual installation of the files,
that is the point we need to take the lock. This also stops the deploy/rpm
directory being accessed for a lock before it exists.
[YOCTO #797]
[YOCTO #925]
(From OE-Core rev: 833a1e970f087dfcb32967cee3e24540f041cde0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add packages gdk-pixbuf-loader-(bmp,ico,ani) to list task-poky-lsb.bb
(From OE-Core rev: fb88c2600d75302f8d55b710c364b4976ec0473b)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaces all '-' in $MACHINE to '_', fixes [YOCTO #946]
(From OE-Core rev: 69b3a11d90579bca687ad3461e7a5cd325079fe6)
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a build causes a real task to be run when the setscene task has already
run then it was possible for dependent packages to be rebuilding at the same
time as a rebuild of the packages they depended on, resulting in failures
when files were missing. This change looks in the setscene covered list and
removes anything where a dependency of the real task is going to be run (e.g.
do_install is going to be run even though the setscene equivalent of
do_populate_sysroot has already been run).
As an additional safeguard we also delete the stamp file for the setscene
task under these circumstances.
Fixes [YOCTO #792]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Unused variables trigger a warning in GCC 4.6 which are caught by -Werror as
used in the elfutils makefiles and therefore the build fails.
This patch adds some consolidated fixes from upstream to remove the unused
variables, they will no longer be required as of elfutils 0.152
Signed-off-by: Joshua Lock <josh@linux.intel.com>
In GCC 4.6 the compiler no longer allows objects of const-qualified type to
be default initialized unless the type has a user-declared default
constructor.
Patch from Gentoo bugzilla: http://bugs.gentoo.org/show_bug.cgi?id=358021
Signed-off-by: Joshua Lock <josh@linux.intel.com>
On Fedora 15 I see a huge Java backtrace when document generation runs for
some xorg libs. As fop is automatically detected, with the possibility of
detecting fop on the host whilst doing target builds, the safest bet is to
explicitly disable fop for document generation.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
I added a note in the "Installing the ADT" section (2.1) saying that
if you need to build the ADT tarball you can use
'bitbake adt-installer'. I also changed the location of the
toolchain from '...yocto-0.9' to '...yocto-1.0'. Finally,
I changed the host sub-directory in the toolchain directory
from 'i586' to i686'.
(From OE-Core rev: 18124c5065fc570e672d068e915e0f476d20379c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 931] - I have removed the Note indicating that the user must run
'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0
(From OE-Core rev: 33a529f94c494531dbbfca5050898eb4c42f64df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quick Start there is a note indicating that you should run
'bitbake make-native' followed by 'bitbake poky-image-sato' if you
are running Fedora 14 or another distribution that ships with GNU.
Colin Walters submitted a patch that offerred an URL for further
explanation on a Make Bug. The URL is
http://www.mail-archive.com/bug-make@gnu.org/msg06220.html. Rather
than submit Colin's patch verbatim I updated the note to include the
reference with a little different wording.
This extra information submitted by Colin will be very helpful.
(From OE-Core rev: d32ccd0ce620942447c7b49c6117c2ea7eff46ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add Freescale MPC8315E-RDB instructions (based on Wind River README passed
on by Bruce Ashfield)
* Add short info paragraph for RouterStation Pro (to match BeagleBoard)
* Add example for connecting to RouterStation Pro serial console with picocom
(From OE-Core rev: 58d443a2ff300ff290486b2153f8a90a8ca2a89b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For safety, always delete the stamp files in sstate_clean regardless of
whether the manifest file exists or not.
(From OE-Core rev: f781c35da9a11eefdb06bda72ca89753df863efa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid deleting stamp files whose names contain the current task's name as a
substring. This will be especially important for example if do_package_write
is ever made an sstate task (as it would previously have deleted the stamps
here for do_package_write_ipk etc.)
(From OE-Core rev: ea743ea30e2289733d27979e8ec921648342da0e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 873] - Added a note in the Images Appendix indicating that
building an image without GPLv3 components is only supported for
base and minimal images. Also put the two changes you have to do
to the local.conf file for the build.
Added a note in the second chapter in the section on building images.
The note indicates the same as in the appendix but does not go into the
local.conf file detail.
(From OE-Core rev: c7960a2e820d7ddb8649ab0b27b3f04843f7af0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try to make the output of the qemu script a bit more consistent by using the
same format for the various warning messages:
WARNING: description of warning.
Detailed description of warning, actions taken, and/or instructions to user.
(From OE-Core rev: 7895377378c197289b82e3bbc059454770911abd)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nVidia's OpenGL libraries are known to have compatibility issues with qemu,
resulting in a segfault. As different workarounds are required for the different
distributions, just warn the user to explain the qemu segfault to follow, and
suggest a workaround using LD_PRELOAD.
[YOCTO #649]
[YOCTO #698]
(Original patch from Edwin, Darren modified warning and git commit wording)
(From OE-Core rev: 2247ffe954b5a71f82944d23141c836b38716654)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Mark Hatle <mark.hatle@windriver.com>
CC: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Newer versions of patch, such as in Fedora 14, don't like ".." within
the middle of the file to be patched path.
In order to fix the issue we have to hand apply the patch instead of using
the normal mechanisms. Only flaw with the os.system(...) approach is if it
fails we don't get any notification or a resolver failure.
(From OE-Core rev: 4e592efe8c5ff918a77f7b7b2c17a6b698b1dd68)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a test to avoid the "sh: bad number" error message during service
start or stop of nfsserver when there is no NFS_SERVERS value set in
/etc/default/nfsd.
(From OE-Core rev: 0f2debd9360abac54d3e44551af309f0bdde96e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
