* this is needed only for 4.7 series, newer works fine with texinfo-5*
[YOCTO #3947]
(From OE-Core rev: e6c13c14f520162e0431d097f78d13eed4586c20)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial installation step for base-passwd, base-files and shadow
will pull in bash if any of these packages depend on /bin/sh and a bash
package has been built, which is undesirable if you are using busybox;
so force the early installation of one or the other depending on which
is going to be installed in the second step.
Note: this fix is not needed for 1.4 (dylan) and newer, since there we
use smart to construct the root filesystem without this initial step.
(From OE-Core rev: 71387ee5a126e3df5771da88eb6febc400f249c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In configure there is a runtime check to determine buggy getaddrinfo and as we
are cross-compiling this check goes wrong. If ipv6 is enabled in python, the
failed test is reported as fatal error with the message
Fatal: You must get working getaddrinfo() function.
Setting ac_cv_buggy_getaddrinfo=no deactivates the runtime check and allows to
compile python with ipv6 enabled.
This commit was cherry-picked from commit 66db85262b
into the danny branch. The original commit was in turn derived from the commit
700b75e7661062aa93cf81205b78c8bf7609922d in the Classic OpenEmbedded Development
Tree.
Fixes: bug #4557
(From OE-Core rev: 0421102cbd78c2e8fe9a027d747be39882ebf20d)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Dimas Abreu Dutra <dimasadutra@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
O irony: the grub2/gnulib nag macro that says "don't use gets, use fgets" breaks the build if you're using a recent (e)glibc release that has gets removed.
Fedora already #if 0's the check in grub, so I stole their patch.
(From OE-Core rev: 261e377b08388a288ee521a3629877b89e18e42b)
(From OE-Core rev: 0785489d558c34cacf5cb349949a15e27084efbf)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch causes install to fail because /etc/mtab doesn't exist, so revert it
for now until the root problem is fixed.
[ YOCTO #4501 ]
This reverts commit 2f5d41f94c53aaf606de66891c37de0dbd86f54b.
(From OE-Core rev: 20ded0315924a083e07900a8a3308bd351b15a8b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
powertop uses gettext during config time and at build time to generate the
messages, so really should inherit gettext.
[YOCTO #4470]
(From OE-Core rev: 5eedfe3fd8cf1f2be451a6c182fd6804ee8bd73b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I noticed this issue trying to build using the Danny branch on what is
currently the most recent openSuSE (12.3). It appears to be similar to the
fedora DSO linking issue:
https://fedoraproject.org/wiki/UnderstandingDSOLinkChange.
Upstream-status: Inappropriate [OE Specific]
(From OE-Core rev: c0ed6d8017eb83321dfb6e5c769cce2c9f81ca0c)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shutdown sanity test that we previously saw on qemux86-64 in 2.6.37 have
started to re-appear reproducably on qemux86 in 3.4 in the Danny series. Until
this can be root-caused and fixed in the kernel, disable paravirtualisation
across all kernels and all qemu machines.
[ YOCTO #4196 ]
(From OE-Core rev: 6091d041e94397a4dda6827868ba48d2e3250d26)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Conflicts:
meta/recipes-kernel/linux/linux-yocto_3.4.bb
This avoids tracebacks from bitbake if the directory doesn't already
exist.
[YOCTO #3640]
(From OE-Core rev: 2d0f0d39dacc57c2c6eefade0b06aed4dc9814d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will silence some of the noisy output from mount.util-linux and the kernel
when trying to automount filesystems or devices. Busybox does not accept the silent
option, it uses a loud option instead.
[YOCTO #3935]
(From OE-Core rev: 796e1390487d602c55467d7654f52e43a4617548)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CQID: WIND00402979
Display corruption was occurring on 64 bit hosts using menuconfig for
the kernel and busybox with the ncurses-native or ncurses-nativesdk
because the configure arguments were not sufficient vs the expected
use from the upstream source.
Also changed in this commit is to provide a fallback to the hard
compiled paths for the terminfo and termcap. Eventually this needs to
be fixed another way if we want a truly portable SDK because any SDK
that is relocated or native binaries pulled out of the sstate can end
up referencing terminfo files that no longer are in the same location.
Because the host system has terminfo files that ncurses will happily
use we might as well have a fall back to buy some time for a better
fix, vs having thing just not work occasionally when using sstate.
(From OE-Core rev: feafff8c529b659ba2b70d32e9f99cd95edde113)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For multilib and other uses of classextend, we don't want any
dependencies on kernel packages to be extended since there should only
be one kernel variant.
Fixes [YOCTO #2918] (where kernel-dev was being extended.)
(From OE-Core rev: 26dc1d726387c76adbfb9df19c18daee10ab636c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than keying on recipes that inherit kernel.bbclass, we should
be checking for providers of virtual/kernel when skipping kernel
recipes in multlib builds.
Not all providers of virtual/kernel inherit kernel.bbclass (notably
linux-dummy), so checking on the provider is a more complete check.
We need to be sure to check for inheritance of module-base as well, this
allows for packages that provides modules to avoid the multilib renaming.
(From OE-Core rev: 036bf4dd800147f18b9b1451061e7e7a794300a7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We could end up with MLPREFIX being prepended to variables like
PACKAGE_DYNAMIC. This patch avoids the problem and unbreaks builds.
[YOCTO #3389]
(From OE-Core rev: 18b401f4f8e931dca08a2e9be34e94c49b5215b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that PACKAGES_DYNAMIC is more standardised, starting with ^ anchors,
the variable manipulations performed by clsextend for multilib don't work.
This patch at least improves it to hack around the problem and enable
mulitlib builds to work again. If this code doesn't do the right thing, the
recipe is free to override the variable with the correct multilib case.
(From OE-Core rev: d4f366c00335d28b90e1b071631aa90ce9d38321)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-1667:
"The rehash mechanism in Perl 5.8.2 through 5.16.x allows context-dependent
attackers to cause a denial of service (memory consumption and crash) via a
crafted hash key."
Patch taken from upstream git.
(From OE-Core rev: ccc272a3f7bf240733dc3af1d8d7b870c55e1f5b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-6329:
"The _compile function in Maketext.pm in the Locale::Maketext implementation in
Perl before 5.17.7 does not properly handle backslashes and fully qualified
method names during compilation of bracket notation, which allows
context-dependent attackers to execute arbitrary commands via crafted input to
an application."
Patches taken from upstream git.
(From OE-Core rev: b585a50b7bd735c3092af9477af263c13c853d32)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-5107:
"The default configuration of OpenSSH through 6.1 enforces a fixed time limit
between establishing a TCP connection and completing a login, which makes it
easier for remote attackers to cause a denial of service (connection-slot
exhaustion) by periodically making many new TCP connections."
Integrate patches from upstream to enable "random early drop" by default./
(From OE-Core rev: 1d4f2d5ef65135e61d78ac0db90afe7f5d166d05)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-6085:
"The read_block function in g10/import.c in GnuPG 1.4.x before 1.4.13 and 2.0.x
through 2.0.19, when importing a key, allows remote attackers to corrupt the
public keyring database or cause a denial of service (application crash) via a
crafted length field of an OpenPGP packet."
Patch taken from upstream git, which is identical in both branches.
(From OE-Core rev: 44ed6605c1978325782d229d0c01329465c4c5c7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The install boot option was giving the following error when one tried to
install the live image on a permanent storage of a BSP.
cat: write error Invalid argument
Installation image failed
sh: can't access tty: job control turned off
Further digging into the issue, found out that the install script was trying
to do this:
cat /proc/mounts > /etc/mtab
And in the base-files recipe the /etc/mtab is made soft link to /proc/mounts.
So the cat command was failing to write on /etc/mtab. As the contents of
the /proc/mounts is already reflected in the /etc/mtab file due to the
symlink-ing, there is no need for this step to recreate /etc/mtab in the
install script. So just removing this unnecessary step, which solves the
install issue of the live images.
Fixes this bug:
[YOCTO #4229]
(From OE-Core rev: 2f5d41f94c53aaf606de66891c37de0dbd86f54b)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libproxy uses glib-2.0, but the depends is missing
Fixes intermittent build errors.
(From OE-Core rev: df39cc2820aeaa8d5187a65945f7739bc6fa53cb)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bluez4 uses readline to be build, but the dependency is not listed
This is listed in the configuration log.
So we add it.
(From OE-Core rev: a3e8c54eb58f3f10427e66c54434c7d623572278)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix the whitespace in the base functions to use TAB instead
of spaces. This is to address feedback from:
Darren Hart <dvhart@linux.intel.com>
(From OE-Core rev: fa0831bb57ed3af55c3547be14131989c4330f7d)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* This is similar to the symlinks provided for the kernel image
in the /boot directory of a file system. The goal is to have
simply named symlinks in /boot that mirror the device tree
name in the kernel sources. This is so that programs like
U-Boot can easily find the default device tree binary in the
/boot directory and use that when booting the kernel.
* Use update-alternatives to handle proper creation and removal
of the symlinks.
(From OE-Core rev: f972ec9522ade7dc35c535a65b04c9f31663f9aa)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* During the base kernel_do_deploy function the directory is
changed to DEPLOYDIR in order to do some cleanup and symlinking.
However, the directory is not changed back to the original
starting directory ${S} at the end. For append functions this
means that the starting directory is not ${S} as expected but
instead ${DEPLOYDIR}.
For functions like the do_deploy_append in
recipes-kernel/linux/linux-dtb.inc there is an assumption that
you are still in the source directory and not the DEPLOYDIR.
Without this change the .dtb files are not copied because the
check for the existence of ${DTS_FILE} which is a relative
path from the ${S} directory fails. This means that the .dtb
files are not copied into the deploy directory and subsequently
the deploy/images directory.
In the log.do_deploy file you will see lines like:
Warning: arch/arm/boot/dts/xxxxx.dts is not available!
(From OE-Core rev: cfac9cc41c98eb1858bd3b0dee3dcc672d53f78b)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
Cherry-pick commit aeb53bd789
[YOCTO #3984]
(From OE-Core rev: 9c10356bde6d303d84daadb8c1170e08e774f5af)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch contains two fixes:
* if the user wants to install the SDK in a directory that already
contains a SDK for the same architecture, a warning will be shown;
* when the symbolic links are relocated use -n option. Otherwise,
symbolic links to existing directories will be created in the
directory itself;
Cherry-pick commit b751ec137d
[YOCTO #3401]
(From OE-Core rev: c3b00f18f24c5ff48981ea3645a58cf48eaa94aa)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an warning:
$ bitbake nativesdk-ncurses
WARNING: QA Issue: nativesdk-ncurses: Files/directories were installed
but not shipped
/opt/poky/1.3+snapshot/sysroots/i686-pokysdk-linux/usr/bin/clear.ncurses
/opt/poky/1.3+snapshot/sysroots/i686-pokysdk-linux/usr/bin/reset.ncurses
NOTE: Tasks Summary: Attempted 533 tasks of which 521 didn't need to be
rerun and all succeeded.
And there is no clear or reset tool in the SDK.
This is caused by:
ALTERNATIVE_ncurses-tools = "clear reset"
It creates clear.ncurses and reset.ncurses which are used for avoiding
the conflicts with the target busybox, but SDK doesn't need them since
there is no nativesdk-busybox (then no conflicts), so:
ALTERNATIVE_ncurses-tools_class-target = "clear reset"
will fix the problem.
Cherry-pick commit dfc39d7bd5
[YOCTO #3325]
(From OE-Core rev: 595ce662fc4f705393205f8b17adfceb2d2df187)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If configure of perl is reattempted it currently fails as it tries to edit
files outside ${S}. Chaging from ${WORKDIR} to ${S} avoids this issue
and allows rebuilds to work.
Cherry-pick commit f2f0a1aa48
(From OE-Core rev: 4cb190a7527300bcaed34bb6f65329c5d6425966)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl shared libraries did not have RPATHs set and that made
autoreconf fail when using the SDK. The LDDLFLAGS environment variable
was already exported in the recipe but was not used when generating the
config.sh.
Cherry-pick commit df1a1dcb6d
[YOCTO #3338]
(From OE-Core rev: ff83f3685ce79712733822cf298d20538757b54d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
File warnings/register.pm has been moved to package perl, update
RPROVIDES_perl to provides perl-module-warnings-register for backward
compatibility.
Update populate_package script for:
1 Way to deal directory 'Module/' is not right, it creates packages
whose names end with '-pm'. Update to drop these packages.
2 Deal directory 'auto/' to put same name module file(.pm) and library
file(.so) into one package. That because .pm file requires the same
name .so file at runtime.
Cherry-pick commit dd65b82d24
[Yocto #3338]
(From OE-Core rev: ecffb5bc90d71d903ca2701383b4229e389a812b)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the move of the strict/vars/config/warnings modules to the main perl
recipe, we need to RPROVIDE those modules to ensure that package dependencies
on those modules continue to work correctly.
Cherry-pick commit 072a6d352f
(From OE-Core rev: 45d4f46801fed8fe746a7e76c4732754950dd28d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake uses PACKAGES_DYNAMIC as regexp
1, use `^' to make matching faster (and it will be more clear
that we're expecting regexp not glob)
2, use `*' to made all those last '-' optional, use .* (or nothing)
3, use `+=' instead of `=' to to keep ${PN}-locale from
bitbake.conf:PACKAGES_DYNAMIC = "^${PN}-locale-.*"
Cherry-pick commit 33b31640bf
Cherry-pick commit fadb407901
(From OE-Core rev: a9b639c061faa9a9a4840218c8c44a71b246373e)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes 2 problems.
The first one is that when run "perl -V" on target, it fails with lack
of some .pm files. So add these perl module files to package perl itself
to fix this failure.
The second problem is that package nativesdk-perl-modules doesn't depends
on the single perl modules.
In the .bb file, dependencies of perl-modules are set by:
RRECOMMENDS_perl-modules = "${@d.getVar('PACKAGES', True)...}"
The PACKAGES would be reset by do_split_packages since:
PACKAGES_DYNAMIC = "perl-module-*"
PACKAGES_DYNAMIC_virtclass-nativesdk = "nativesdk-perl-module-*"
Then:
1) The target perl-modules RRECOMMENDS on perl-module-*, this is what
we expect.
2) But the nativesdk-perl-modules doesn't RRECOMMENDS on
nativesdk-perl-module-*, this is not what we expect.
The value of PACKAGES after do_split_packages has been set correctly (it
contains the nativesdk-perl-module-* packages)
But the:RRECOMMENDS_perl-modules = "${@d.getVar('PACKAGES', True)...}"
doesn't work correctly for nativesdk, the
d.getVar('RRECOMMENDS_perl-modules', True)
doesn't get the new value of the PACKAGES, it gets the value of PACKAGES
before the do_split_packages.
Cherry-pick commit 51cbb5ae76
(From OE-Core rev: 4c2e03d9c078c72eb82cf9b9604cb7256387ccbe)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fails to parse when http://patchwork.openembedded.org/patch/40997/ is used
Parsing recipes...ERROR: There is a confusing multiline, partially commented
expression on line 10 of file
/OE/shr-core/openembedded-core/meta/recipes-devtools/perl/perl-rdepends_5.14.2.inc
(| sed "s/\/.*\.pm: */ += /g;s/[\"\']//g;s/;.*/\"/g;s/+=.*\(require\|use\)\>
*/+=
\"perl-module-/g;s/CPANPLUS::.*/cpanplus/g;s/CPAN::.*/cpan/g;s/::/-/g;s/
[^+\"].*//g;s/_/-/g;s/\.pl\"$/\"/;s/\"\?\$/\"/;s/(//;" | tr [:upper:] [:lower:]
\).
Please clarify whether this is all a comment or should be parsed.
ERROR: Unable to parse
/OE/shr-core/openembedded-core/meta/recipes-devtools/perl/perl_5.14.2.bb: Exited
with "1"
ERROR: Command execution failed: Exited with 1
Cherry-pick commit 54b8096f91
(From OE-Core rev: b82d85633fd8a364eb6b3193ef1f8d5744572202)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Base on dependency create script provided by Saul, I update it with:
1 remove document strings in perl module files that may import fake
dependencies.
2 not all the 'use' or 'require' clauses start at the begin of line, and
some of them don't end with ';', such as:
use vars qw(
$AUTOLOAD
...
3 filter some strings that they are not real dependencies: some of them
are wrong result of script, some are conditional use/require, and some
are cpan extra modules that we don't need.
Cherry-pick commit 4601eb90f5
(From OE-Core rev: 26a6ab8ffd0d8ecbe9fc72e517407b797f5a63e9)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update dependencies for perl modules again. When only install
perl-module-file-glob, run perl script with "require File::Glob;" will
fail. Update dependencies to fix that.
Cherry-pick commit c65e88b3f2
[Yocto 3069]
(From OE-Core rev: 3b80ac16772971418c88d90407ea45540f79c32c)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Run autoreconf fails because it uses several perl modules and they
requires other perl modules. So update these dependencies for:
perl-module-exporter
perl-module-file-glob
perl-module-file-path
perl-module-file-spec
perl-module-file-stat
perl-module-io-file
perl-module-io-handle
perl-module-io-seekable
perl-module-posix
And RDEPENDS rules in file perl-rdepends_5.14.2.inc don't work for
nativesdk perl module packages. Replace all "perl" with "${PN}" in the
file to fix that.
In nativesdk.bbclass it calls
oe.classextend.NativesdkClassExtender().map_packagevars() to map package
vars include var RDEPENDS. In map_packagevars():
for pkg in (self.d.getVar("PACKAGES", True).split() + [""]):
the value of var "PACKAGES" may not be calculated correctly, so for
all the nativesdk packages created by
PACKAGES_DYNAMIC_virtclass-nativesdk += "^nativesdk-perl-module-.*"
dependencies are wrong.
Cherry-pick commit f816625bf2
(From OE-Core rev: c1f5e07406df7ef1c7e960cf9ba9eb38f460f235)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update autoconf runtime dependencies on perl and perl modules. And
remove RDEPENDS for nativesdk because the nativesdk-autoconf has same
dependencies with autoconf.
Then fixes autoreconf runs failed both on target and toolchain.
Bump up PR.
Cherry-pick commit 3533e801ee
[Yocto 3100]
(From OE-Core rev: 1f98d3ea9f89347ed841faec65893170c72bb18e)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When relocating the SDK, applications using python will search for
python modules in the default location and will fail to start.
The below errors are thrown by gdb, for example:
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
In order to overcome this, add the PYTHONHOME variable to the
environment-setup script for both standalone toolchain and
adt-installer. No need to do that for meta-ide-support environment
script since this toolchain does not get relocated.
Cherry-pick commit db0a02492c
[YOCTO #3839]
(From OE-Core rev: 15454b99e3cbeaf2e411f1e374b512a19a72995a)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using distutils for a python package based on a python-setuptools
installation script that sets up a console script, the header
of the console script created by setuptools points to the
python-native path.
The console scripts are commonly executed in the image, but not
in the sysroot environment. Therefore, the header of the
console scripts should point to the python interpreter in the
image.
Setuptools does not allow to set the path of the python
interpreter via some command-line argument.
Hence after the installation script ran, the distutils
class replaces the path in the console script files created by
the installation.
(From OE-Core rev: 55c6f1318fe62f7cec37776853cf8bef82a55f89)
Signed-off-by: Lukas Bulwahn <Lukas.Bulwahn@oss.bmw-carit.de>
sgw - added \ to protect the space.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upstream authors have updated the licenses of a couple subcomponents,
these were GPLv3, but updated to be either GPLv2 or LGPLv2.1 accordingly.
These changes make the util-linux package become completely non-GPLv3.
Cleaned up some white space issue also
[YOCTO #4014]
(From OE-Core rev: 70b758344a0d83fb3eb82ecaffe5f05c7a0579e8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00392947 ]
It is not good user experience that the self-extracting archive (.sh file)
has no execution permission by default.
(From OE-Core rev: aede5db60c1e3111f34bda8ea4bb7e890ca77efc)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches and .pc directories should not be shipped since the patches
were already applied. So, remove these 2 directories.
[YOCTO #3983]
(From OE-Core rev: 4026ea5f98ee34fff4f541d83aa85f929df37b3b)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 2.6.37 kernel on the AB occasionally fails dmesg and shutdown
tests with general protection faults.
(From OE-Core rev: 6bac3375f14e326a06537d329afad72325fb6a4f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
