If the path contains 'scripts' more than once the first occurrence will be
incorrectly used. Use rfind instead of find to find the last occurrence.
(From OE-Core rev: fd544c3ef6ece1e2f9849ee87227efc6d0954e15)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel recipes for linux-yocto_4.1 have outdated branches as default, making it
impossible to find the right branch if the user picks the default value.
The branches_base property uses these outdated branches also.
This updates standard/common-pc and standard/common-pc-64 branches to standard/base
The fix was tested using 'yocto-bsp create' with each one of the following archs:
-i386
-x86_64
-qemu (i386 and x86_64)
After the layer was created, it was added to local.conf and the MACHINE was set
accordingly.
'bitbake linux-yocto' ran successfully with each configuration tested.
[YOCTO #9160]
(From meta-yocto rev: 32e3c2d3910c42f12957c874902a01da94a7971a)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using x86_64 arch in yocto-bsp the script suggests
4.1 as the default kernel version; however, as soon as the
default is picked the script continues processing with
3.19 kernel.
This changes the default kernel version to 4.1, which is the
right value and matches the script's message.
[Yocto #9353]
(From meta-yocto rev: 932184bef928d83249c4b4e5dcd36c68d4264cd6)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add 'do_kernel_configme' and 'do_kernel_configcheck' to
SRCTREECOVEREDTASKS of kernel packages. These tasks should not be run
because kernel meta in the srctree is not necessarily up-to-date or
even present which causes build failures and/or invalid kernel config.
Especially so because 'do_patch' which is a dependency of
'do_kernel_configme' is not being run.
We now store .config in the srctree and 'do_configure' task is able to
run successfully.
(From OE-Core master rev: 7ce4c18a4ba1ebcb9f46e652a881ace1f21d2292)
(From OE-Core rev: 4d879cb8d7384ac4a96f22c1664b8875f2d8f615)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the correct kernel config to be used when building kernel
from srctree (extrernalsrc). If no kernel config is present in the
builddir 'do_configure' task copies .config from the srctree.
(From OE-Core master rev: 3b516332e038a587685f6e0c14a7f04990bdd6cc)
(From OE-Core rev: 32593f2b6a44a7bfdab55aec7e172476020fd4eb)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a file is given using --sourceparams then wic directly use that file
instead of copying them to build folder. At time of assembling it os.rename
is called which renames all the files to name. In that process the original
file is renamed. When image recipe is rebuilt then wic complains about
missing file which was renamed in previous build.
[YOCTO #8854]
(From OE-Core rev: d3dee0f4107156442238c9ea82f742afeeb0665a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
(From OE-Core master rev: 33c52b1f2d39feb641465bf42e8b16d0ab22a316)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the hardcode branch name set to KTYPE, where its value is used as a base branch
when user decides to create a new branch. Tested on x86_64 architecture.
[YOCTO #8630]
(From meta-yocto rev: ab895be90a0cae7dfa77a8aab3b19e5571e7e7bc)
(From meta-yocto rev: bc5aec2348b2c314953806734a8fbabf798d142c)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 9d585b5025)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On linux-yocto-dev or linux-yocto_X.YY bbappend files, the SRC_URI includes
{{=machine}}-standard.scc, which in turn includes {{=machine}}-user-parches.scc,
thus there is no need to include it again on the corresponding bbappend file.
[YOCTO #8486]
(From meta-yocto rev: 11c93b5dd8c651df478d4810e1b6ff6ad9fa57e8)
(From meta-yocto rev: c1105ff0e65a24f344e5fab17402b1b4fcb1d728)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit f674ffa528)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On the 3.19 to 4.1 migration, the target x86_64 was not taken into account
(no reason, just missing the correspoding update on the kernel-list.noinstall
file), so moving it to 4.1 to be align with the rest.
(From meta-yocto rev: 283665d9295c3c10f964496dc0110137e358daa6)
(From meta-yocto rev: d58d3c5e65294bd6f4f3f780d746e1c3f8678c2b)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 9cc221dcb6)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to run the clean for all recipes that are being reset before we
start deleting things from the workspace; if we don't, recipes providing
dependencies may be missing when we come to clean a recipe later (since
we don't and couldn't practically reset them in dependency order). This
also improves performance since we have the startup startup time for the
clean just once rather than for every recipe.
(From OE-Core master rev: c10a2de75a99410eb5338dd6da0e0b0e32bae6f5)
(From OE-Core rev: d64a5794098e9ca715a70daa704f571ba97e9912)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running "raise" with no arguments here is invalid, we're not in
exception handling context. Rather than also adding code to catch the
exception I just moved the check out to the parent function from which
we can just exit.
(From OE-Core master rev: 0164dc66467739b357ab22bf9b8c0845f3eff4a4)
(From OE-Core rev: d9c5653f994e0f366c9154a2a988175a9f8e3130)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Clone the correct path - we need .git on the end
* Pull from the specified path instead of expecting a remote to be set
* up in the repo already (it isn't by default)
(From OE-Core master rev: 1a60ee8bd21e156022c928f12bb296ab5caaa766)
(From OE-Core rev: a0e1ff92b189681df5cf106dc924e76bb05caf31)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We read the updateserver setting from the config file but we never
actually used that value - the code then went on to use only the value
supplied on the command line.
Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com>
(From OE-Core master rev: 1c85237803038fba539d5b03bf4de39d99380684)
(From OE-Core rev: 3940fe87f944bd2067a96b1b6a8c1dc646569690)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
(From OE-Core master rev: e5b841420b9fdd33829f7665a62cd06a3017f7e6)
(From OE-Core rev: fa0424ee742a6b331f1c6462eb69fecba6dc7f86)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having fetched the source and unpacked it to a temporary directory, we
then move part of it to the destination directory, or if the source is at
the top level we move the whole temporary directory, but in the latter
case we were later attempting to delete the temporary directory which no
longer existed. Clear out the variable so that doesn't happen.
(From OE-Core master rev: 91714a52e91cddba5a16c73cf5765d1f47f7856c)
(From OE-Core rev: 8b7644fa4cd72b7f80d2aaa3bfcd2efed2402d37)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user specifies a URL that just returns a web page, then it's
probably incorrect (or broken); attempt to detect this and show an error
if it's the case.
(From OE-Core master rev: 83b1245b2638eb5d314fe663d33cd52a776a34a7)
(From OE-Core rev: cf61eff7bbc9afa0eeb1fd481f1d4b75429a1c24)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a URL ending in /, BitBake's fetcher returns a localpath
of ${DL_DIR}, and if you then try to unpack that it will attempt to copy
the entire DL_DIR contents to the destination - which at least on my
system filled my entire /tmp. Obviously we should fix the fetcher, but
at least detect and stop that from happening here for now.
(From OE-Core master rev: 7e63a672517518644a37ce006e05b5494c29cf6e)
(From OE-Core rev: 623e59b103c1edf3211384d26cc0c83cfd424587)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In my testing here it appears make -qn returns an error (exit code 2)
whereas make -n doesn't; I can't immediately tell why based on the
documentation. We don't actually care for it to be quiet since we're
capturing the output, so let's just leave -q off and have this work
properly as a result.
(From OE-Core master rev: 30c4cd9efdac400d713dff645f23f2627277d75a)
(From OE-Core rev: d76191cef76c6c4416a5e635a9424192e16c1090)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a fetch error occurs, the fetcher already prints a reasonable error -
we don't need the traceback as well, so catch that and exit if it
occurs.
(From OE-Core master rev: c2cc5abe34169eae92067d97ce1e747e7c1413f5)
(From OE-Core rev: b2706b5b311d456e7da5acf02e25f3f8650c50e5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you grab a URL for a github repository you'll almost certainly find
it in https://github.com/path/to/repository.git format; but bitbake's
fetcher can't handle that because it'll see https:// at the start and
assume it should use wget to fetch it. If the URL starts with http:// or
https:// and the path part ends with .git then assume it's a git
repository and adjust it accordingly.
(From OE-Core master rev: bdbc4cf41d30eddb8a9ed882dedcc1670ce8fdd6)
(From OE-Core rev: 9d41e993a95a7b60f1ed5f8e9ca887fdf393233c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the SDK update server hasn't been set in the config (when building
the extensible SDK this would be set via SDK_UPDATE_URL) and it wasn't
specified on the command line then we were failing with a traceback
because we didn't pass the default value properly - None is interpreted
as no default, meaning raise an exception if no such option exists.
Additionally we don't need the try...except anymore either because with
a proper default value, NoSectionError is caught as well.
(From OE-Core master rev: 9763c1b83362f8445ed6dff2804dd7d282861f79)
(From OE-Core rev: b2696869c1428e8ef2a198d2432121ddc2e2034c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're upgrading a recipe that fetches from git, and we've simply
fetched a tarball of the repo instead of directly from the upstream repo
(this can happen if you have PREMIRRORS set up as in poky with a core recipe,
e.g. kernelshark) then we won't have any new revisions, and the checkout
will fail with "fatal: reference is not a tree: <hash>". To avoid this,
do a "git fetch" before checking out the new revision.
(From OE-Core master rev: c4daebf3fe797a8063dcbc2ab229be2fbedc8134)
(From OE-Core rev: 2c8afd6aae775ab10dd30eb890fc410739048d79)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're upgrading a git recipe the recipe file usually won't need
renaming; for some unknown reason we were throwing an error here which
isn't correct.
(From OE-Core master rev: 656348dff9bc9dd1cafc8fff11e5e374e3667f0f)
(From OE-Core rev: 9816c0a2ad2c1011e298d734576b531de9947740)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code was clearly never tested. Fix the following issues:
* Actually set SRCREV if it's been specified
* Enable history tracking and reparse so that we handle if variables are
set in an inc file next to the recipe
* Use a more accurate check for PV being in the recipe which will work
if it's in an inc file next to the recipe
(From OE-Core master rev: 8b8f04226ebf464fa61c05ca7af7c6cbda392339)
(From OE-Core rev: 105a7c90dac6f43b7c3d1de92827db2db8419112)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you did a "devtool add" followed by "devtool upgrade" and then did
a "devtool reset" on the recipe you upgraded, the first recipe would
also be deleted from the workspace - this was because we were
erroneously adding the entire "recipes" subdirectory and its contents to
be tracked for removal on reset. Remove the unnecessary call to
os.path.dirname() that caused this.
(From OE-Core master rev: 65354e066f87df7d3138adceb22d6a05d1685904)
(From OE-Core rev: c44d41b0dec7457c4347a00b21d8b5bd24a9b887)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The external source of kernel has been patched during the
construction of git repository. Include the do_patch task in the
SRCTREECOVEREDTASKS.
(From OE-Core master rev: 0731c5a9e98f7b7f6e5ada9bbb99acb3f5884516)
(From OE-Core rev: e82466ebd9c8b9277255680d5efdd76eabf125b1)
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By mistake, the file initially had a wrong extension name, so changing to the
correct one.
(From meta-yocto master rev: 32c2278b8fe93429d4cfa097eefccd20157cd3b8)
(From meta-yocto rev: 4bc43893cc437e4278f7332b4486a196a7d0315d)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously exec_native_cmd() would remove all items from PATH except for
the native sysroot. This can cause issues for the tools that are created
using create_wrapper().
Now instead of wiping out the PATH, run a sanity check to check if the
command is in the native sysroot.
(From OE-Core rev: ba127370e621b5b683d6f454596c3d0c60c13df7)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
(From OE-Core rev: 1f7752282ffb47d2621030ddb2fa42a5e491d6d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If recipe parsing fails we need to exit out instead of attempting to use
the data object that's set to None, which resulted in a traceback.
(From OE-Core rev: a46fb1a06be2df00a0bceb4e60ebdecb55b5974c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the directory specified by --extract-to exists, because we were using
shutil.move() to move the temporary extracted directory to the specified
path, a subdirectory was being created under that directory instead of
moving the contents, which was a different result than if the directory
didn't previously exist. We could try to always move the contents but
that's complicated when any symlinks are involved; the simplest thing is
just to remove the directory (which should be empty anyway) before
moving the temporary directory across in its place.
(From OE-Core rev: 2880bd23b471c1966661b9f05726faf60f9c0e7e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use "git cherry" against the original tag that we made when we extracted
the source in order to find the revisions that are definitely new. This
allows you to modify a commit in the middle of the series and then run
devtool update-recipe and not have the subsequent patches unnecessarily
modified.
Fixes [YOCTO #8388].
(From OE-Core rev: 7baf57ad896112cf2258b3e2c2a1f8b756fb39bc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
(From OE-Core rev: 68cbe684fe6d8fe3a44e47ed85837d09077df6d5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
(From OE-Core rev: b54796d013c562972e962126400503085281b425)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make a bit more human-friendly the karch properties when storing
into a file.
(From meta-yocto rev: 39292d397658a8e30c73d4cdaced66cb0efa8380)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add 4.1 kernel support. Old bbapends were not removed, so user still
have the option for 3.14/3.19 kernels.
(From meta-yocto rev: f47ea7224765a3c3da3a9e0a989173b2b1950cfc)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user wants to output the list of properties for a corresponding architecture
and the output parameter is given (--o/-outfile), there is no need to show the
properties into the console.
(From meta-yocto rev: bd133e2a6e626b4158f5a303d85205de9c66e8f2)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
(From OE-Core rev: b7ab82485e4514e07ab8a76e554da27ddc92e6c0)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
(From OE-Core rev: a3bb5bd25b72bd1bcc156dabd0ffa2d9184bb160)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Helper function for replacing a pattern like:
target_dir = os.path.dirname(target)
bb.utils.mkdirhier(target_dir)
shutil.move(source, target)
(From OE-Core rev: c09e5b11225a673534594c3642ceead3eb5653a3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement new function that handles patch file generation. The new
function also does the discovery of new, updated and deleted patches.
(From OE-Core rev: 183812e60e1dce09c77b41a5a927ab7fb6fdcf9d)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When adding multiple new patches append them to SRC_URI in correct order
so that they apply correctly.
(From OE-Core rev: 819680092c1b49c16f4ab01d135d44311a9dacca)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only need the base configuration to get the variable values we want
to get here, there's no need to parse recipes / load the cache.
(From OE-Core rev: 84172ff7b325f081dba6430fd27f12e3745838b5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
(From OE-Core rev: 05060699e63cd25d089e83e9aa56c11d5baa8fd8)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a subcommand to search to find the target recipe name providing
some file or capability. This is implemented by searching on recipe
name, package name, description, package contents (file names), and
runtime file provides. For example:
$ devtool search libGL
mesa
$ devtool search X11
xextproto
libxxf86vm
xf86driproto
xf86vidmodeproto
libxfixes
xproto
libx11
...
$ devtool search /bin/sed
busybox
sed
This is particularly useful within the extensible SDK but is also made
available in devtool alongside the build system.
Note of course that because this searches pkgdata, useful results depend
upon do_packagedata(_setscene) having executed for the recipe being
searched for.
(From OE-Core rev: 48cbde0ea77ed20126eceba5feb37c42a9229500)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We ship the runqemu script and if we build QEMU itself within the
extensible SDK, then it would be nice to be able to run it. This is a
very thin wrapper around runqemu, supplying the machine and image name
so the user doesn't need to. (This subcommand is only available within
the extensible SDK since it only really makes sense there where it is
otherwise hard to run runqemu directly.)
Implements [YOCTO #6657].
(From OE-Core rev: abca7a0cac7068ffe6a6b873d0842f804388b621)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
(From OE-Core rev: 9e0a6b2e6f16185f8032d36b77d40802bc388987)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
(From OE-Core rev: f6b90bceaedf9bad3d111e6ca1fa79e59f472c73)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
