File is not used.
(From yocto-docs rev: 6e972aa916327ea981aabfedf2e7ac7bbacb8fec)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated several files to change the title of the dev-manual from
the "Yocto Project Development Manual" to the "Yocto Project
Development Tasks Manual." Did some edits in the README and the
Makefile as well for completeness.
(From yocto-docs rev: 0278d6d3bb458af1cb04fbc3eed96dff12d19475)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure "figures/kernel-overview-2-generic.png" was missing
the ".png" suffix in the TARFILES statment. This was throwing
an error during the make process for the manual. Probably an
error for quite some time and not noticed. I added the suffix
to remove the make early exit error.
(From yocto-docs rev: 00ad7874f8da149f193caeab8fd89bbf6d8132d7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The introductory stuff in the QS is really conceptual information and
needs to be in the ref-manual where YP is introduced. Regarding the
QS, all we really need to do is point to places where the reader can
go to find that stuff out.
Part of this move involved getting the diagram of the YP flow for
the environment from the QS to the ref-manual. That figure was
named "YP-flow-diagram.png". It was named "yocto-environment.png"
in the QS but I renamed it when moving it to the ref-manual. This
caused some edits to the "Makefile" to clean up the figure lists
for tarballs.
(From yocto-docs rev: ab108c0959e3a9f36d25080245482f8a790c8c87)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a figure for this simple build workflow that uses
BitBake from a Linux host. Also did a bit of re-writing.
A new figure was introduced so the Makefile had to be adjusted
to include that figure. The figure resides in the figures
directory of both the dev-manual and the mega-manual.
(From yocto-docs rev: c3b0b1d53f551c02202cef80a8a48dd24576b975)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The section on the devtool workflow in the dev-manual was 99%
identical to what was in the sdk-manual. I have moved the
workflow procedure from the old "Model" chapter of the dev-manual
to be merged with what was in the sdk-manual. In truth, the
only things added were a note about devtool not being exclusive
to SDK development.
The result of moving (deleting) this section was that the "model"
chapter of the dev-manual went away. The devtool stuff, Quilt,
devshell, and python shell are all out now and there is no
chapter left. So, mega-manual had to be adjusted to not pull that
chapter in when building the dev-manual. I had to delete three
figures that were used in the flow. The figures were already
replicated in the sdk-manual. The figures were deleted from the
figures folder of both the dev-manual and the mega-manual.
I had to make sure all references to the old devtool stuf in the
YP doc set were adjusted.
(From yocto-docs rev: 5dbd643d31ab502df53a22229e457a03da7772b7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The overview section of modifying the kernel needed to be in the
kernel-dev manual and not in the dev-manual. I moved it and took
care of all the links and external references throughout the YP
doc set. One figure was involved that had to be moved to the figures
folder in kernel-dev from dev-manual. That is why the Makefile had
to be edited.
(From yocto-docs rev: 3a704b64544678785b883f82d6e82aedac6790c5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The section that presented the Yocto Linux kernel file structure
resulting from a build using BitBake needed to be in the kernel-dev
manual. I moved it over. This required transferring over a
figure as well.
(From yocto-docs rev: 0abc6c7d87a6aa10dac28fefbb280eb51fea61a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The information in the dev-manual kernel overview area really neeeds
to be in the Appendix on kernel structure in the kernel-dev manual.
I moved that informtaion to the appendix. Removal of one redundant
image was necessary from the dev-manual. The figure was literally
repeated in the kernel manual already under a different file name.
(From yocto-docs rev: 00ca68e760e41448c225fb1ca4a77f5201434b93)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moved the section on BSP Development workflow from the dev-manual
into the bsp-guide. This procedure needs to live in the BSP
guide.
Many links had to be fixed.
(From yocto-docs rev: fbf06240f83221929aea237660146e0076207f6a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I moved the "Workflows" section to the ref-manual. This section is
primarily concepts and needs to be out of the dev-manual, which
is being reconstituted into a "how-to" manual.
(From yocto-docs rev: 2f8bfaac3da9e2d7042ea381a3e8957f96b5bf5a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The "Yocto Project Source Repositories" section is purely conceptual
and thus does not belong in the reconstituted dev-manual, which is
converting to a "how-to" manual. I have moved this section to the
ref-manual under "The Yocto Project Development Environment" section.
Moving the section affected several things. Three figures that where
in the dev-manual were copied and moved to the figures folder of the
ref-manual. This required deleting them from the dev-manual and
adding them to the ref-manual.
The makefile had to be edited to move those figures into the ref-manual
and delete them from the latest version of the dev-manual in order for
the tarball of files to be correct when the manuals are made.
Links to anchors within the moved section had to be fixed in various
manuals. Links to the main section "id" had to be fixed to point
to the ref-manual manual.
(From yocto-docs rev: c619ae2bbc6be93cb0324ca44e936eefec12b28c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
(From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a devtool add and devtool modify flow digram. Updated
the Makefile to support those figures in the tarball creation.
(From yocto-docs rev: b40692065262dee0209329886b6e3a743c32b1bd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I left off the file extension when I added a new figure to the
SDK manual. This caused the tarball to fail.
(From yocto-docs rev: f1984b00b44ad7f1890adecdb7e2f6dd4af5b96c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Including three figs for Toaster manual.
(From yocto-docs rev: c41f9859b6cfc4e34b8e0d0e812fad0b8dd44540)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These figures were added through a patch and needed to also
be local to the figures directory in the mega-manual.
Also, the Makefile must list the figures for the TAR file.
(From yocto-docs rev: 6904899f2df8c531f1d6f7c61482d737b9e93971)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new figure for the devtool upgrade flow. Put the figure
in the "figures" folder of the dev-manual and the mega-manual.
Updated the Makefile to include the new figure when creating
Tarball of the dev-manual and the mega-manual.
(From yocto-docs rev: 4b504f6f179ca7c7e9a69f23fc25b1f33ced8e44)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new figure for devtool add flow. Added support
for it in the Makefile. The figure, as usual, needs to
reside in the figures directory in both the dev-manual and
the mega-manual.
(From yocto-docs rev: 2040a31b806fdade060f7a4182a09673b76db7b3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile - Added support for new sdk-manual.
mega-manual - Added the sdk-title.png file to the list of figures.
Modified to support inclusion of the new sdk-manual
into the mega-manual.
poky.ent - Added a new string to support the new sdk-manual.
sdk-manual - Created new sdk-title.png image.
Created new sdk-manual.xml file.
Created sdk-manual customization layers for both
standard build and Eclipse build.
Note that we are pointing to local XSL templates for
and these will change going forward.
Created new sdk-style.css file.
Created three chapter files that are placeholders
at this point.
(From yocto-docs rev: ab591831a97a97d405d13ed75e9fb01e0452c292)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The docs are not building on CentOS and we think it is due to the
XSL templates being called for the Eclipse parts. I located all
the "current" templates and switched them out for "1.76.1" version
as are used by the mainstream doc builds.
(From yocto-docs rev: afbddde6524630433dfec973bbe886de32395bc8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the three Toaster Manual figures to the list of
mega-manual figures so they will be included in the tarball
generated for mega-manual.
(From yocto-docs rev: 2190bc43dfc20c0c0ef5da82c85570f9294e1788)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to the files that support building out and publishing
the Toaster User Manual:
* poky.ent - Added a new variable YOCTO_DOCS_TOAST_URL that can
be used in other manuals to link to sections with the Toaster
User Manual.
* Makefile - Added a section of code to build out the Toaster
User Manual. Currently, no eclipse support is added as I don't
think we want to cross into that development environment with
Toaster.
(From yocto-docs rev: 35ea6656265d61024d5db36a534a7250f783956a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in proper front matter for the mega-manual. This effectively
creates a real title for the manual as well as a brief abstract
that explains why this behemoth exists.
(From yocto-docs rev: 26c78f0b00762846a839fbfc9ba969b7aa5d5b58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed draft of the new devtool material. This commit affects
some linking and figures across the YP doc set.
* Added the build-workspace-directory.png file to both the
dev-manual and the mega-manual.
* Updated the Makefile to include the new figure in the TARFILE
for dev-manual and mega-manual.
* Re-did the section organization to pull the quilt and finding
source file out of the "Modifying Source Files" section.
(From yocto-docs rev: 4585b9fbb1636ae3c65e2e3ad2d1d6baca636e59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, making a file will not include the PDF version of the
manual. Some manuals you can't do a PDF version anyway (i.e.
yocto-project-qs and mega-manual). The PDF versions do not need
to be part of the mainstream make process. If someone wants these
they can take the extra step of doing 'make pdf DOC=<manual>'.
(From yocto-docs rev: 16f605350adb1b252b94e921faf282d0634cefb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* small number of typos fixed.
* documentation corrected in a couple places.
* for most part, reduce line lengths to 80 for printing.
I was going to fix just a couple typos, then figured that while i was
there, might as well do some cleanup, mostly in the area of reducing
line lengths to 80 where possible for printing. feel free to comment
on any other possible aesthetic fixes, i can add them and resubmit.
(From yocto-docs rev: cfe4c061d8691e128933b81693aa42c809ef5486)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 914c482bd89071ab34b3381e3bd8065f871cc047.
I had to revert this change because it broke the footnote behavior.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered some artifacts and inconsistencies with how the YP
Quick Start was made. I made the following changes:
1. Changed the structure of the QS from "article" to "book"
as it is a separate book. This change doesn't fix anything
but it does bring the XML file closer to passing validation.
2. Removed the <abstract></abstract> tag. This tag was in place
simply to display the PNG file for the Yocto logo in the upper
right part of the first page. After turning the QS into a
book from an article, the title could be displayed as a PNG
file similar to the other books. This change solved two issues:
1) removed the empty "abstract" element from being displayed in
both the mega-manual and the PDF version, and 2), brought the
author and look of the first page into line with other YP
manuals.
3. Removed the old PNG file used to display the Yocto logo at
the top of the QS. This file was removed from both the
yocto-project-qs and mega-manual "figures" directories.
4. Added a new "yocto-project-qs-title.png" file to both the
yocto-project-qs and mega-manual "figures" directories.
5. Updated the "qs-style.css" file's .authorgroup element to
match and behave like the other YP manuals. This effectively
correctly displays the title PNG file for the QS.
6. Updated the Makefile area where the TAR files are made for
both the yocto-project-qs and the mega-manual. I had to
substitute in the new PNG file for the QS one and had to
add the title PNG to the mega-manual part.
(From yocto-docs rev: 914c482bd89071ab34b3381e3bd8065f871cc047)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c031c014bae6d6e4a239a4bcd1e8b9d5d272f851)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Created a new figure for the flow. This involved putting the figure
into the "Figures" directory of both the dev-manual and the mega-manual
and then updating Makefile to include the figure in the TARBALL
variable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Added a new figure to support the expanded section on SDK
generation. Figure added to "figures" directory for both
the ref-manual and the mega-manual. Updated Makefile to
include the figure in the TARBALL variable for both the
manuals.
(From yocto-docs rev: 41f78fddfd871fdd4c1c963b98093567d4b4d230)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Created the figure for the BitBake-resident image generation
discussion. Figure added to the Makefile so it is included
in the TARBALLS for ref-manual and mega-manual.
(From yocto-docs rev: 607c88dcf060a804475b2f4b9cf22f2d8172a61d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
The new section on package creation required a new figure.
I added the figure to the TARBALL creation part for both the
ref-manual and the mega-manual.
(From yocto-docs rev: 3e752dd95659282833519bff866adc940a156ba7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
A new figure named configuration-compile-autoreconf.png was
introduced in a new section. Thus, the figure had to be added
to the tarball creation for both the ref-manual and the
mega-manual.
(From yocto-docs rev: aa0967ee49fa5d8053e14e0cc229b47a0e65b1f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Had to add the patching.png figure to the TARBALL for the
mega-manual and the ref-manual.
(From yocto-docs rev: fe51c2c76f364956683c484527e245a745920dc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Created a new section called "BitBake" that will provide an
expanded discussion of the basic YP build process. The
"BitBake" section has a new sub-section called "Source Fetching."
Part of the new section is a new figure named source-fetching.png.
The figure must reside in the "figures" directory in both the
ref-manual and the mega-manual. It must also be listed for each
of these manuals in the TARBALL statement in the Makefile.
(From yocto-docs rev: 41eff3e755a98ff31cadccfb1cd7dfcf569b4d9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Applied review comments to the "Images" and SDK sections that
are part of the "A Closer Look at the Yocto Project Development
Environment" section. Comments from Paul. They resulted
in a single figure being removed and split into two new
figures - one for the image part and one for the sdk part.
Some terminology issues were cleaned up in the main sections
as well as the documented variables sections.
Makefile changes involved adding the two new figures and
removing the old combined one.
(From yocto-docs rev: a32908fa68b9786e295097c16f70a5a9c3cc4c1e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Added a new section for the closer look at how BitBake creates
images and the SDK installer files. This included the section
itself, a new .PNG figure that had to be added to the figures
directory of both the ref-manual and the mega-manual. Finally,
the Makefile needed to be edited so that the tarballs for the
ref-manual and mega-manual also included the new figure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I left off the ".png" part of a figure in the TARBALL statement.
(From yocto-docs rev: e1024da36a94dd3cb8c0679782bedaba4bf2e5dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
